Details
The T-1000Z-RAP Thermal Printer addition to the T-1000 Bagger
Standard Features:
• Full color 7-inch touch screen with user friendly programming (controlled through the T-1000 touch screen)
• Job save/recall recipe management with USB backup
• Up-time/Down-time reporting with detailed downtime indicators
• Auxiliary communications with networking capability
• Preset, totalizing and maintenance counters
• Point of use water filter to remove 99.9% of water from air lines
Perforation or photo-optic registration system for precise thermal print registration. Perfectly integrated with the T-1000, the Ti-1000z RAP is operated from a single touch screen that also controls the bagger.
If adding to a T-1000 bagger manufactured after 2015 that did not previously have a printer, you must also purchase part number TP-220516 COM 4 Cassette and set the PC link from 1 to 2.
Weight
Additional Information
Air | 40 psi |
---|---|
Voltage | 110V/60Hz std. (220V/50Hz capable) |
Minimum Bag Size | 2 in. wide x3in. long |
Maximum Bag Size | 14in. wide x 32 in. long |
Printer Style | Intermittent In-line thermal transfer with film accumulation |
Print Speed | up to 10 in/ sec (depending on graphics, font size, and print quality required) |
Web Width | 14 in. |
Print Head Width | 4 in. std (5 and 8.5 in. capable) |
Print Resolution | 200 dpi std (300 and 600 dpi capable) |
Memory | 8 MB std (64 MB capable) |
Material Sensors | Ribbon Out Photo Sensor, Bag Out Photo Sensor |
Standard Interface | USB 2.0 port, high speed bidirectional IEEE 1284 parallel interface |
Ribbon | thermal transfer |
Bag Configuration | up to 14" diameter rolls |
Bag Thickness | 1.0 to 5.0 mil |