Configured UF-2000 TEC ULTRALINE Horizontal-to-Incline Conveyor with the following dimensions: Exposed belt width “W”: 12in. Horizontal length “C”: 2ft. Incline length “A”: 6ft.The conveyor will include the following features: Extruded and anodized aluminum frame and side-rails. Full support belt pan over entire conveyor. "V" tracking system. Blue FDA Monofilament Belting Belt speed 40ft / min. 115VAC / 60Hz / 1 phase gear motor. Manual motor starter with overload protection. Quick leg adjustments in height and along the frame. 1-1/2in. high cleats on 12in. centers 11-1/2in. long. Adjustable legs with feet in-feed end, legs not to protrude above top of frame. Adjustable legs with 3in. diameter soft rubber swivel casters with locks discharge end. Totally enclosed drive and pulleys for maximum safety. Adjustable angle 30 degrees to 60 degrees. Short side rails on horizontal section, not to protrude above cleats. 8ft. power cord. No hopper or flapper on horizontal section of conveyor, motor to be covered with flat plate, mounted behind horizontal section. Stainless steel discharge chute