UF-3040 Vibratory Hopper/ Pan-Feeder Conveyor System Model UF-3040 incorporates a large bulk Hopper which is supported on its own stand to hold bulk products. Tied to the hopper, a conveyor is positioned at the end of the vibratory feed pan with parts trap. Cleated compartment conveyor lifts the product to APP counters or scales, or other third-party systems. Advanced Poly configures this item as a pre-feeder based on system or customer requirements for bulk capacity, infeed height and discharge height. Hopper Specifications (standard): • 4-5 Cubic Foot, Powder Coated CRS Hopper • Adjustable slide gate to dispense product from hopper onto the Vibratory feed pan - Vibra-drive feed pan with adjustable vibration controller • Welded, Black Powder Coated CRS Frame • Conveyor Specifications: (Standard specifications listed) • Conveyor Length: 6 Feet • Exposed Belt Width: 12 inches • White Monofilament Cleated Belt • Cleats 11.5" wide x 1.5" High on 6" Centers • Angle of Incline: 45 degrees • V-Belt Guidance System • Variable Belt Speed (0-30 Ft/Min ) • formed Polycarbonate cover over Incline Section • Stainless Steel Discharge Chute • 120V/60Hz Notes: Specification may change, which may affect pricing: 1) Hopper capacity may change based on infeed height or other spec changes; customer to advise infeed height required. 2) Potentiometer to adjust vibration level; if integrated into APP equipment, this level will be controlled through the touch screen of the counter/scale system 3) FDA / White or Steel-it coatings available, customer to specify 4) Conveyor length may change based on required discharge height; customer to advise discharge height required. 5) Conveyor width may change, 6", 12" or wider conveyors available, customer to specify. 6) White, green, or black belts available (white is FDA), customer to specify. 7) Cleat heights may change, 1", 1.5", 2", 3" or higher available, customer to specify. 8) Angle is adjustable from 40 to 60 degrees, which will affect the discharge height. 9) 1/4 HP Motor standard, to be specified based on weight of product and conveyor width/length 10) Standard open discharge chute may cause some parts to bounce; closed adjustable lid available 11) Voltage available: 110V/60hz or 220V/50Hz, customer to specify 12) Castors also available for mobility, customer to specify *Note: Customer specified changes may require updated quote with higher pricing.

Details UF-3040 Vibratory Hopper/ Pan-Feeder Conveyor System Model UF-3040 incorporates a large bulk Hopper which is supported on its own stand to hold bulk products. Tied to the hopper, a conveyor is positioned at the end of the vibratory feed pan with parts trap. Cleated compartment conveyor lifts the product to APP counters or scales, or other third-party systems. Advanced Poly configures this item as a pre-feeder based on system or customer requirements for bulk capacity, infeed height and discharge height. Hopper Specifications (standard): • 4-5 Cubic Foot, Powder Coated CRS Hopper • Adjustable slide gate to dispense product from hopper onto the Vibratory feed pan - Vibra-drive feed pan with adjustable vibration controller • Welded, Black Powder Coated CRS Frame • Conveyor Specifications: (Standard specifications listed) • Conveyor Length: 6 Feet • Exposed Belt Width: 12 inches • White Monofilament Cleated Belt • Cleats 11.5" wide x 1.5" High on 6" Centers • Angle of Incline: 45 degrees • V-Belt Guidance System • Variable Belt Speed (0-30 Ft/Min ) • formed Polycarbonate cover over Incline Section • Stainless Steel Discharge Chute • 120V/60Hz Notes: Specification may change, which may affect pricing: 1) Hopper capacity may change based on infeed height or other spec changes; customer to advise infeed height required. 2) Potentiometer to adjust vibration level; if integrated into APP equipment, this level will be controlled through the touch screen of the counter/scale system 3) FDA / White or Steel-it coatings available, customer to specify 4) Conveyor length may change based on required discharge height; customer to advise discharge height required. 5) Conveyor width may change, 6", 12" or wider conveyors available, customer to specify. 6) White, green, or black belts available (white is FDA), customer to specify. 7) Cleat heights may change, 1", 1.5", 2", 3" or higher available, customer to specify. 8) Angle is adjustable from 40 to 60 degrees, which will affect the discharge height. 9) 1/4 HP Motor standard, to be specified based on weight of product and conveyor width/length 10) Standard open discharge chute may cause some parts to bounce; closed adjustable lid available 11) Voltage available: 110V/60hz or 220V/50Hz, customer to specify 12) Castors also available for mobility, customer to specify *Note: Customer specified changes may require updated quote with higher pricing.