For UK service,
Please visit http://appuk.co.uk

T-1000 Options and Accessories


Options and Accessories for the T-1000

*** Possible Parts Order Delays ***

Please note that, due to relocation of the Parts Department, orders placed between August 27th and September 5th may be delayed by up to 1 week.

Although the T-1000 is extensively equipped with many "built in" options, a full range of auxiliary options and equipment can easily be added for special purpose packaging or to improve your packaging operation.

Some of the available options are:

Light Curtains               Counting Funnel

Partition Tables             Load Shelves 

Bar Code Verifiers        Optical Palm Buttons

Adjustable Carts           Accumulating Funnels

Products

Items 41 to 50 of 60 total

per page
Page:
  1. 2
  2. 3
  3. 4
  4. 5
  5. 6

List  Grid 

Set Ascending Direction
  1. Currency Dispenser Option

    Currency Dispenser Option

    Product Code:
    • TO-T1-CD20
    CD-20 Automatic Cash Dispenser Automatically feeds wrapped stacks of US Currency into the T-1000 Advanced Poly Bagger. Features: • 30" tall stack accumulator / dispenser to hold up to 30, 1" stacks • Low level product sensor • Special product chute • Product verification sensor • Controlled by the T-1000 touch screen Learn More
  2. CB-10 Compartment Seal Option

    CB-10 Compartment Seal Option

    Product Code:
    • TO-T1-CB10
    CB-10 Compartment Seal Option Create two compartments in the bag with this special program functionality to prevent, for example, one product scratching another. After the first product is loaded, the bag is sealed and the bag is blown open a second time. After the second product is loaded, the bag feeds to the second seal point and a second seal is applied. Note: Depending on the top compartment size, a Drop Frame or Extended Drop Frame configuration may be required. This may limit the bag size. Learn More
  3. Bag-Open Sensor

    Bag-Open Sensor

    Product Code:
    • TO-T1-BO20
    BO-20 Bag Open Detector Detects the bag opening by "looking" across the bag surface with a special photo eye to detect that the bag material, even clear films. Includes: • Photo Eye with cables • Adjustable position mounting bracket *Note: Bag size must be a minimum of 4" wide to consistently blow open enough for the Eye to detect the film. Learn More
  4. BB-10 Bag Blow Off Assembly

    BB-10 Bag Blow Off Assembly

    Product Code:
    • TO-T1-BB10
    Bag Blow-Off Assembly Learn More
  5. Optical Pick-To-Light Touch Button

    Optical Pick-To-Light Touch Button

    Product Code:
    • TO-T1-PB10
    The Pick-to-Light sensor is an ergonomic alternative to a footswitch. Designed to eliminate hand, wrist, and arm stress, the no-contact optical sensor creates a safer and faster bagging operation. LED illuminated base indicates that the machine is ready (green) to be cycled, flashes (green) when in cycle, and is off when the bagger is not available to be cycled or is in a setup mode. If an error condition exists, the touch screen will display the actual error message such as “Waiting for Labels”, “Jam Detected”, “Air Supply not Connected” or “Out of bags”. Once the condition is cleared, the temperature is Ready and the bagger is place in a Run mode, the Green LED will be illuminated indicating a production “go” status.ors on the system. Learn More
  6. Palm Button Assembly, Optical No-Contact Safety Switches

    Palm Button Assembly, Optical No-Contact Safety Switches

    Product Code:
    • TO-T1-PB20
    PB-20 Dual Optical Palm Buttons Optical no-contact safety switches. Both optical detectors must be triggered simultaneously to begin operation of seal bar. Anti-lockout operation ensures that this safety device cannot be defeated. Features: • No-touch operation to avoid operator fatigue disabled footswitch and automatic operation • Two optical switches with plastic housing • Interface cables • Program enabled in PLC. Note: Recommended safety option when funnel is removed and when loading directly into the bag. Learn More
  7. Air Assist Option For Parts Chute

    Air Assist Option For Parts Chute

    Product Code:
    • TO-T9-AS10
    Air Assist Option For Parts Chute Learn More
  8. Driven Wind-Up Unit, RAP-1400

    Driven Wind-Up Unit, RAP-1400

    Product Code:
    • TO-T1-WINDUP
    Driven Wind-Up Unit. Driven Wind-Up stand is a stock item on the Roll-a-print, and an option for any bagging unit. This unit can wind up bags as they are fed from a bagger or printer. Tension is controlled pneumatically. Specifications: • Linear potentiometer controls the speed of the wind-up motor • DC motor / drive control • Pressure regulator to control tension Learn More
  9. TW-10 Twin Seal Function

    TW-10 Twin Seal Function

    Product Code:
    • TO-T1-TW10
    TW-10 Twin Seal Function To increase seal integrity of the bag, simply enable this function to cause the T-1000 to seal a second time, a programmed distance from the initial seal location. Often required for medical applications, but also an option for high-value components to improve seal integrity. Learn More
  10. TS-10 Trim Seal Assembly

    TS-10 Trim Seal Assembly

    Product Code:
    • TO-T1-TS10
    TS-10 Trim Seal Assembly. Trims excess from bag above seal - 1" additional bag length suggested for trimming. Not suggested for CPP materials. Includes: • Special trim seal bar • Modified gripper plate • Air pulse tube • Scrap deflector plate • Scrap catch bag • Option enabled in bagger PLC (adjustable air removal pulse seal time and temperature settings) *Note: With Standard Frame configured bagger, the T-1000 will remove 1" to 2" of material. With Drop Frame configured bagger, the T-1000 will remove 1" to 3.5" of material. *Note: specifications may change dependent upon the thickness of the material. Learn More

Items 41 to 50 of 60 total

per page
Page:
  1. 2
  2. 3
  3. 4
  4. 5
  5. 6

List  Grid 

Set Ascending Direction