Heater Cartridges

Cartridge, Heater 400W

Heater Cartridge, 110V/800W Note: Voltage is inscribed on the cartridge surface (cylinder). Confirm the correct voltage before installation. APP supplies this component with a PTFE sleeve, crimped connectors, and a two-pin nylon connector for a T-1000 C/B and T-1000-S14 (all 14" models) except TYV model. Weight: .5 lbs.

Please contact Advanced Poly for more information on this part.

Cartridge, Heater (Wide Bags) 120 V, 850 W 0.496" Diameter +/- 0.002" 13.5" OAL +/- 0.27" 0.25" Nominal Disk End No Heat 40% (320W) / 20% (160W) / 40% (320W) in equal length 1.5" Nominal Lead End No Heat 16" Swaged In PTFE Leads and Seal 304 SS Sheath

Heater Cartridge, Distributed Heat 110V/800W (T-1000, all 14" models) To combat heat loss at the ends of the Heater Cartridge, 3" ends are 22% hotter and the center causing a more evenly distributed temperature range. This Heater Cartridge is recommended for wider bags, thicker materials, or medical applications requiring medical validation. Specifications: Diameter: .496". Length: 13 1/2" Volts: 120 Watts: 850 Lead Length: 15"

Same as TP-217116-3 except 220V. To combat heat loss at the ends of the Heater Cartridge, 3" ends are 22% hotter and the center causing a more evenly distributed temperature range. This Heater Cartridge is recommended for wider bags, thicker materials, or medical applications requiring medical validation. Specifications: Diameter: .496". Length: 13 1/2" Volts: 120 Watts: 850 Lead Length: 15"

Please contact Advanced Poly for more information on this part.

Please contact Advanced Poly for more information on this part.

Heater Cartridge, 10-3/4" L x 3/8" Diameter 600W Heater is for a TYVEK Bagger and installs on the Pressure Bar 48" Long Leads